Here they are. the ultmate ESC just got saver if your running 4S all the time. these are the same as the wonderful B-12 ESC but with NO BEC. they are NOT just ESC with the power wire removed. they have NO UBEC components. This means it will NOT power your Flight controller. this also means all of the extra heat from dropping a high 4s voltage is gone! true OPTO isolated. if your plan to stickey run 4s Setup. they are the strongest, lightest, fastest, and now coolest temperture ESC out today.
The input capacitor has also been upgraded from 16 to 25V for ample operation. Plus the added a heat-sink adds for even better sustained high current operation. Try to keep them in moving air is best.
These ESCs will give your multi rotor quicker reflexes, less drift, and smoother flights. These are so fast, compared to standard ESCs you can double your PI gains! ALL ESCs are flashed with the most current version of the famous SimonK firmware. Future software updates can be performed through the servo cable eliminating the need for complicated flashing jigs.
**Currently we are flashing them with SimonK 5-15-13 firmware to be compatible with the Sunnysky X2204 motors, etc.
Get one normal and three without BEC is an optimal setup for racing quad
- Continuous: 12 Amp
- Burst: 16 Amp
- Atmel processor
- All N-FETS
- Battery: 2-3S Lipoly
- SBEC: NONE . NO bec
- Size: 22 x 21 x 4mm
- Weight: 10g
All ReadToFlyQuads ESCs come ready to fly, preset with BLHeli settings to accomodate high kv motors used in most miniquads, including the Advanced 2204 1900/2300kv, House 2300kv, or any 1806 2300kv motor etc. For most setups there is no need for further configuration. but with the bootloader enables all the programming can be done via the USB programmer over the servo line
One BEC and three without BEC is an optimal setup for racing quad.