B-12A Ice Blue series OPTO-NO_BEC SimonK-(RapidESC)

Here they are. the ultmate ESC just got saver if your running 4S all the time. these are the same as the wonderful B-12 ESC but with NO BEC. they are NOT just ESC with the power wire removed. they have NO UBEC components. This means it will NOT power your Flight controller. this also means all of the extra heat from dropping a high 4s voltage is gone!  true OPTO isolated. if your plan to stickey run 4s Setup. they are the strongest, lightest, fastest, and now coolest temperture ESC out today.

The input capacitor has also been upgraded from 16 to 25V for ample operation.  Plus the added a heat-sink adds for even better sustained high current operation. Try to keep them in moving air is best.

These ESCs will give your multi rotor quicker reflexes, less drift, and smoother flights. These are so fast, compared to standard ESCs you can double your PI gains! ALL ESCs are flashed with the most current version of the famous SimonK firmware. Future software updates can be performed through the servo cable eliminating the need for complicated flashing jigs.

**Currently we are flashing them with SimonK 5-15-13 firmware to be compatible with the Sunnysky X2204 motors, etc.

Get one normal and three without BEC is an optimal setup for racing quad

Specifications

• Continuous: 12 Amp
• Burst: 16 Amp
• Atmel processor
• All N-FETS
• Battery: 2-3S Lipoly
• SBEC: NONE . NO bec
• Size: 22 x 21 x 4mm
• Weight: 10g

OPTO – less EMI in the multicopter frame and less heat – you get a lot of electrical noise from 4 to 8 high amp uBECs in a radial pattern at the centre of your multicopter

These ESCs will give your multi rotor quicker reflexes, less drift, and smoother flights. These are so fast, compared to standard ESCs you can double your PI gains! ALL ESCs are flashed with the most current version of the famous SimonK firmware. Future software updates can be performed through the servo cable eliminating the need for complicated flashing jigs.

**Currently we are flashing them with SimonK 5-15-13 firmware to be compatible with the Sunnysky X2204 motors, etc.

Get one normal and three without BEC is an optimal setup for racing quad

12 Amp RapidESC BLHeli multi can also be flashed. For most users we find SimonK plays best with almost all flight controllers, for an amazing flight. If you want to play around with BLheli, try to changing Standard config to:1. timing set to med-hi, 2. demag compensation set to off, may require more changes for your battery/motor setup. For more info on BLHeli go here