BL20A Mini ESC (SN20A) SIMONK-(RAPIDESC)
$9.00
Description
Super small and compact design. This esc supports all of the latest features for racing. AutoShot supported, damped light supported. OneShot auto-detect is the perfect ESC to use on mini FPV quads. These are all flashed with SimonK and are tested before shipment. No need to reflash or program. But if you wish to program, you may also purchase the usb linker to re-flash or change settings. These esc’s are programmed so that you can easily flash through the signal wires of the esc. No separate program leads or connections necessary.
Flashed with newest SimonK firmware installed and tested! All of the units shipped are 2015.11 Date code. November 2015. Every unit tested under load, and solder visually inspected.
ESC Features:
Specially for Multi-copter, throttle respond fast;
Suit for throttle, which can compatible well with motor;
Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable;
The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
Minaturization design, Mini16/20A with high performance capacitor fliter on the board, weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.
Suit for throttle, which can compatible well with motor;
Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable;
The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
Minaturization design, Mini16/20A with high performance capacitor fliter on the board, weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.
Enable Racing Mode! (Dampened Light Supported)
Settings are changed/tuned for better handing during Racing! : PWM Frequency/Damped, Motor Timing, Beacon trength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of AutoShot!
- Specification:
- SimonK 2015-09-12
- Damped Light Ready
- Oneshot Ready (plug and play with flip32)
- Small (kiss size) (only 2 grams without wires)
- Up to 600Hz signal
- ultra-low resistance all MOSFET design
- BLHeli or simonK bootloader enabled
- Flashable via the servo leads
- Voltage: 6-16.8V(2-4S LiPo)
- Output Current: 20A
- BEC: Without
- Signal frequency: 20-500Hz
- Output PWM frequency：18KHz
- Firmware：BLHELI-(ONESHOT)
- Weight：2.0g(without wires)
- Size：23*12*4.5mm
Reviews (0)
Be the first to review “BL20A Mini ESC (SN20A) SIMONK-(RAPIDESC)”
You must be logged in to post a review.
Reviews
There are no reviews yet.