RTF Mini “4-in-1” 12-Amp 35×35
Maximize all the performance you can out of your multirotors. Featuring ultra light weight construction with excellent thermal properties for an ESC – the MOSFETS are specifically selected to run SimonK with the least amount of heat production and highest efficiency. Users will need to install wires.
This is not for the timid solderer; there are very small solder pads. Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you still need to file down the thick edges. If you are not comfortable with a soldering iron, please see our B-12A esc.
5-15-13 simonK firmware installed for best compatibility with high kv motors.
NOW WITH BLHeli Boot-loader! Update settings easy with 1 wire interface!
Flashed with newest BlHeli 14.4 firmware installed and tested! RTF 12A BL-Heli ‘4-in-1″ ESC are made for any MultiCopter – specifically to run at 2s,3S or 4S they also feature ultra light weight gram construction with excellent thermal properties. – the MOSFETS are specifically selected to run BL-Heli WITH active damping code with the least amount of heat production and highest efficiency. This is opposite to the majority of ESCs retrofitted with SimonK or BL-Heli which actually run much hotter and are less efficient – We have selected very carefully the BEST mosfets to run on BLHEli code – These ESC are perfect for 3S or 4S pro-spec Quads. These ESC have OneShot enabled auto-detected code installed. – Damped Light Mode and Oneshot capable.
RTF Mini “4-in-1” 12-Amp 35×35 HIGH VOLTAGE up to 4s- Damped Light Mode and Oneshot capable.
Users will need to install and wires. no extra cap needed
Please note: This is for more advanced users. Good soldering is a must. Watch to make sure the solder does not overflow to the mosfets.
Watch your spacer size, the clearance is minimal. 3mm spacers work best, but you may still need to file down the thick edges.