Awesome quality, true diversity Based on the Open source RX5808 project. All credits for  sheaivey . SMA Plug . Now Pre- Flashed with V2 Software to unlock many new features and improvements overall. Now with ‘Find Model” feature.
https://github.com/sheaivey/rx5808-pro-diversity/
Now pre-Flashed with “V2” of the Firmware thanks to gc9n
https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible
This Open source hardware is super powerful. with the power of the community there are many Firmware to flash and try. Check out the links below. :
GC9N Firmware –Â https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible
Direct hex here:Â https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible/blob/master/rx5808-pro-diversityGc9n.ino.hex
Dexterbot Firmware –Â http://www.quadcoptermafia.com/LaForge/Reallac-Firmwares/
Jelle FPV Firmware –Â https://dl.dropboxusercontent.com/u/23598820/rx5808-realacc-div.hex
Original Shea Ivey RX5808 Firmware –Â https://github.com/sheaivey/rx5808-pro-diversity
or also flash the
- RealACC Hardward
- Frequency: 5.8G
- Channel: 40CH
- All in one integrated receiver
- Fits Fatshark Goggles
- With OLED display for setup
- Auto scan
- Channel switch in 25ms
- Follows all realacc rx5808 tutorialsÂ
- Â Feature that is called “Find Model” if you lost your quad but you still have image , then with a directional antenna in A ( Helical or Patch) , if you point to the right direction the persentage of signal will rise so you will know aproximatelly the direction of the object.
Plug and Play – firmware loaded and tested
ADD OSD to your hardware here : Â (TUTORIAL: OSD MENU FOR REALACC DIVERSITY MODULE & FATSHARK GOGGLES BUTTON SUPPORT) Â https://oscarliang.com/realacc-osd-menu-button-support/
Firmware support here:Â https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible
Check out how to change the Picture and re-flash here: Â ( This article is about how to flash a RX5808 diversity module with the latest firmware and also change the start screen.) http://blog.seidel-philipp.de/flash-rx5808-diversity-modul-laforge-true-d-realacc/
Find tons of mod pictures here :Â https://www.dropbox.com/sh/d6gtome0xvbdr54/AAAZXb-QxH4QTKlqRqx0jd-Ya?dl=0
Package Included:(antennas are not included)
1 x Main Receiver
1 x Minor Receiver
Good Thread about the hardware here:Â https://www.rcgroups.com/forums/showthread.php?2701921-Realacc-RX5808-Open-Source-Fatshark-5-8G-40CH-Diversity-Receiver-like-Laforge/page103
Connect an FTDI to the bottom of the RX5808 and flash with Xloader:
http://russemotto.com/xloader/XLoader.zip
Find the eeprom_clear.ino.hex here if you get suck : https://www.dropbox.com/s/ejkeicfvxm18a2l/eeprom_clear.ino.hex?dl=0
FTDI drivers here:Â https://www.dropbox.com/s/arlfk73l4qvg8qp/USB%20_DRIVERS_Windows.zip?dl=0
On Xloader, Select:
File – the HEX you just downloaded
COM – COM of your FTDI
Device – Duemilanove/Nano(ATmega328)
Baude rate – 57600
Click upload and wait to finish, yours RX5808 will reboot with the new firmware.software
Firmware is ready for OSD mod.
V2.0 OSD Support (Menus-RSSI-Diversity-Battery) Fatshark Button Support
- Added OSD support for menus
- Ultra fast Real time RSSI feed back
- Ultra fast Real time Diversity feed back
- PAL or NTSC recognition
- Goggles Battery monitor
- Fatshark Buttons Compatibility
- Favorites enhancement
- “Find Model” Feature
- Set Filter L M H < now you can set histiric filter between 5-25 ,it will also show if its high or low or med, and save it in eeprom !> <press middle to go back to menu > up and down to + and – the filter value ! <press middle to go back to menuÂ
-  Spectate mode ! this will scan all channels for active signal and hold it there for 15 second and will look for the next active one , if you press up or down button you can change the range ,40ch full scan only 8 race band or just 8 immersion !<press middle to go back to menu >
Reviews
There are no reviews yet.