RTF RX5808 Pro Diversity for Fatshark Goggles (Split Version) W/ V2 Software

Awesome quality, true diversity  Based on the Open source RX5808 project. All credits for  sheaivey . SMA Plug . Now Pre- Flashed with V2 Software to unlock many new features and improvements overall.  Now with ‘Find Model” feature.

https://github.com/sheaivey/rx5808-pro-diversity/

Now pre-Flashed with “V2” of the Firmware thanks to gc9n

https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible

This Open source hardware is super powerful. with the power of the community there are many Firmware to flash and try. Check out the links below. : 

GC9N Firmware – https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible

Direct hex here: https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible/blob/master/rx5808-pro-diversityGc9n.ino.hex

Dexterbot Firmware – http://www.quadcoptermafia.com/LaForge/Reallac-Firmwares/

Jelle FPV Firmware – https://dl.dropboxusercontent.com/u/23598820/rx5808-realacc-div.hex

Original Shea Ivey RX5808 Firmware – https://github.com/sheaivey/rx5808-pro-diversity

or also flash the 

• RealACC Hardward 
• Ultra fast Real time RSSI feed back
• Ultra fast Real time Diversity feed back
• Frequency: 5.8G
• Channel: 40CH
• All in one integrated receiver
• Fits Fatshark Goggles
• With OLED display for setup
• Auto scan
• Channel switch in 25ms
• Follows all realacc rx5808 tutorials 
•  Feature that is called “Find Model” if you lost your quad but you still have image , then with a directional antenna in A ( Helical or Patch) , if you point to the right direction the percentage of signal will rise so you will know approximately the direction of the object.

Plug and Play – firmware loaded and tested

ADD OSD to your hardware here :  (TUTORIAL: OSD MENU FOR REALACC DIVERSITY MODULE & FATSHARK GOGGLES BUTTON SUPPORT)   https://oscarliang.com/realacc-osd-menu-button-support/

Firmware support here: https://github.com/gc9n/rx5808-Diversity-RealAcc-Compatible

Check out how to change the Picture and re-flash here:  ( This article is about how to flash a RX5808 diversity module with the latest firmware and also change the start screen.) http://blog.seidel-philipp.de/flash-rx5808-diversity-modul-laforge-true-d-realacc/

Find tons of mod pictures here : https://www.dropbox.com/sh/d6gtome0xvbdr54/AAAZXb-QxH4QTKlqRqx0jd-Ya?dl=0

 

Package Included:(antennas are not included)

1 x Main Receiver 

1 x Minor Receiver

Good Thread about the hardware here: https://www.rcgroups.com/forums/showthread.php?2701921-Realacc-RX5808-Open-Source-Fatshark-5-8G-40CH-Diversity-Receiver-like-Laforge/page103

Connect an FTDI to the bottom of the RX5808 and flash with Xloader:

http://russemotto.com/xloader/XLoader.zip

Find the eeprom_clear.ino.hex here if you get suck : https://www.dropbox.com/s/ejkeicfvxm18a2l/eeprom_clear.ino.hex?dl=0

FTDI drivers here: https://www.dropbox.com/s/arlfk73l4qvg8qp/USB%20_DRIVERS_Windows.zip?dl=0

On Xloader, Select:

File – the HEX you just downloaded

COM – COM of your FTDI

Device – Duemilanove/Nano(ATmega328)

Baude rate – 57600

Click upload and wait to finish, yours RX5808 will reboot with the new firmware.software

Firmware is ready for OSD mod.

V2.0 OSD Support (Menus-RSSI-Diversity-Battery) Fatshark Button Support

• Added OSD support for menus
• Ultra fast Real time RSSI feed back
• Ultra fast Real time Diversity feed back
• PAL or NTSC recognition
• Goggles Battery monitor
• Fatshark Buttons Compatibility
• Favorites enhancement
• “Find Model” Feature -if you lost your quad but you still have image , then with a directional antenna in A ( Helical or Patch) , if you point to the right direction the percentage of signal will rise so you will know approximately the direction of the object.
• Set Filter L M H < now you can set histiric filter between 5-25 ,it will also show if its high or low or med, and save it in eeprom !> <press middle to go back to menu > up and down to + and – the filter value ! <press middle to go back to menu 
•  Spectate mode ! this will scan all channels for active signal and hold it there for 15 second and will look for the next active one , if you press up or down button you can change the range ,40ch full scan only 8 race band or just 8 immersion !<press middle to go back to menu >