Flip32+ AIO Version 2.0

Jumper Define

Jumper 11 – controls the power source for 5V+ on the Telemetry port(UART1)

Default: from LDO — less noise, but can only supply up to 100 ma

Cut & Short: from BEC — more noise, but can supply up to 500 ma

Jumper 14 – controls the voltage output on Serial RX Port (UART2)

Default: 5V

Cut & Short: 3.3V

WARNING: Please switch it to 3.3v before connect any 3.3v devices on this port(spektrum satellit receiver)

Jumper 15 – controls the UART2 / Soft Serial 2* port pins

Default: hardware UART2

Cut & Short: connects software serial 2 to the UART2 Soft Serial 2* port instead of hardware UART2

Note: If Jumper 15 is cut and shorted, the onboard current sensor will no longer work, however

available. By default the current sensor will work, but software serial 2 will not be available.