KK Mini Multi-Rotor Flight Control Board 36x36mm (30.5×30.5mm)
Preloaded with Awesome Steveis V1.19S1 (newest DEC .4. 2014!) Pro Firmware for easy setup. Â
The KK-mini is packing all the same power, but with a new mighty-mini form factor.The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it’s just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
Used the same screen like the  first and second  generation so the parts are easy to find! Preloaded with Steveis V1.19S1 Pro Firmware  for easy setup.! (newest DEC .4. 2014!)Â
A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK-Mini added polarity protection to the voltage sense header. The voltage sense line has been updated for better accuracy.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 PinSH USBasp AVR programming interface ensures future software updates will be quick and easy.
Specs:
Size:Â 36x36x11.5mm (mounting holes 30.5×30.5mm)
Weight: 10 grams (15g with cables)
IC:Â Atmega644 PA
Gyro/Acc:Â 6050MPU InvenSense Inc.
Auto-level:Â Yes
Input Voltage:Â 4.8-6.0V
AVR interface:Â standard 6 pin.
Signal from Receiver:Â 1520us (5 channels)
Signal to ESC: 1520us
LCD size: 24*18mm
Mini buttons size:Four 3.3*4.2mm
Firmware Version:Â Â SteveisV1.19S1Â (newest DEC.4. 2014!)Â
KK Mini Multi-Rotor Flight Control Board 36x36mm (30.5×30.5mm)
Preloaded with Awesome Steveis V1.19S1 (newest. DEC.4. 2014!)  Pro Firmware for easy setup. Â
The KK-mini is packing all the same power, but with a new mighty-mini form factor.The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it’s just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
Used the same screen like the  first and second  generation so the parts are easy to find!
A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK-Mini added polarity protection to the voltage sense header. The voltage sense line has been updated for better accuracy.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 PinSH USBasp AVR programming interface ensures future software updates will be quick and easy.
Reviews
There are no reviews yet.